PINS, ANCHORS, RETAINING RINGS 6-31 1830 Ellsworth Industrial Dr NW, Atlanta, GA 30318 | 800.556.3967 | momar.com ANCHORS All trademarks and brand names are the property of their respective owners. See back page for copyright details. Anchor Size (Inches) Bolt Dia. Drill Size (Inches) 3,000 PSI Concrete Tensile Strength (Lb.) 3,000 PSI Concrete Shear Strength (Lb.) Tensile Block Item No. Pkg. Qty. 1/4 1/4-20 1/2 2,320 2,100 1,925 Lb. NS153393 25 5/16 5/16-18 9/16 2,600 3,300 2,100 Lb. NS153394 25 3/8 3/8-16 11/16 3,640 3,850 2,440 Lb. NS153395 10 1/2 1/2-13 7/8 5,100 8,100 3,050 Lb. NS153396 5 Forway® Expansion Shields • Evenly distributed four-way expansion of anchor wall by internal nut • Excellent holding power in concrete, brick, stone and cinder block • Corrosion-resistant, non-deteriorating zinc alloy casting bends and conforms without fracturing • Meets GSA Specification FF-S-325 3.2.2.2.1.3 • Use for anchoring medium and heavy loads in solid and hollow-base materials • Typical applications: Guard rails, fascia, equipment hangers, straps, conduit, overhead plumbing installations and suspended heating and air conditioning ductwork Tensile strength, shear strength and tensile block values shown; a 4:1 safety factor is recommended. Forway® is a registered trademark of U.S.E. Diamond, Inc. 1. Drill hole to at least shield length. 2. Clean hole with air or wet swab. 3. Place Forway® Expansion Shield in the hole. 4. Position fixture or equipment. 5. Insert screw or bolt through equipment into shield and tighten. NOTE: Screws not included. Wej-It® Anchor Bolts • Zinc-plated, rust-resistant steel • Meets the following specifications: OSHA Section 1910.212 (b), I.C.B.O. No. NS126766, GSA FFS-325 and ASTM B633 • Designed for installation in concrete block, brick and stone 1. Drill hole to depth equal to length of Wej-It® Anchor Bolt. Clean hole with compressed air and wire brush. 3. Tighten the nut three to five turns past the hand-tight position. 2. Drive Wej-It® Anchor Bolt into drilled hole through fixture until washer is flush with fixture. Maximum Tensile and Shear Values As Tested in 28-Day Unreinforced Stone Aggregate Concrete Wej-It® and Hole Dia. (Inches) Embedment Depth (Inches) Tensile Strength at 2,000 PSI (Lbs.) Shear Strength at 2,000 PSI (Lbs.) Tensile Strength at 4,000 PSI (Lbs.) Shear Strength at 4,000 PSI (Lbs.) 1/4 1 1,088 1,751 1,450 2,316 1-1/8 1,320 1,751 1,780 2,316 1-1/4 1,748 1,751 2,231 2,316 1-1/2 1,855 1,751 2,473 2,316 3/8 1-1/2 2,876 4,286 3,834 5,213 2 3,017 4,286 4,022 5,213 3-1/2 3,299 4,286 4,399 5,213 4 3,488 4,286 4,650 5,213 1/2 2 3,430 7,138 5,717 10,748 2-1/4 3,473 7,138 5,789 10,748 3-1/2 3,847 7,138 6,411 10,748 4 4,328 7,138 7,213 10,748 5 4,809 7,138 8,015 10,748 5/8 3 6,711 10,719 11,185 15,583 3-1/2 7,582 10,719 12,636 15,583 3-3/4 8,336 10,719 13,893 15,583 4 8,623 10,719 14,372 15,583 3/4 3 11,579 15,537 19,299 21,000 3-1/2 12,249 15,537 20,415 21,000 4 12,918 15,537 21,530 21,000 5 13,550 15,537 22,583 21,000 Recommended safe working load is one-fourth tensile and shear values shown. Dia. (Inches) Length (Inches) Thread Length (Inches) Drill Size (Inches) Minimum Embedment (Inches) Item No. Pkg. Qty. 1/4 2-3/4 1/2 1/4 1 NS151385 25 3 1/2 1/4 1 NS151386 25 3/8 2 7/8 3/8 1-1/2 NS151387 25 2-3/4 7/8 3/8 1-1/2 NS151388 25 3-1/2 7/8 3/8 1-1/2 NS151389 25 5 7/8 3/8 1-1/2 NS151390 10 1/2 2-3/4 1 1/2 2 NS151391 10 3-1/2 1 1/2 2 NS151392 10 5 1 1/2 2 NS151393 10 5/8 3-1/2 1-1/4 5/8 3 NS151394 10 4-1/2 1-1/4 5/8 3 NS151395 10 3/4 4 1-1/2 3/4 3 NS151396 2 5 1-1/2 3/4 3 NS151397 2
Handyman Catalog
| Title Name |
Pages |
Delete |
Url |
| Empty |
Ai generated response may be inaccurate.
Search Text Block
Page #page_num
#doc_title
Hi $receivername|$receiveremail,
$sendername|$senderemail wrote these comments for you:
$message
$sendername|$senderemail would like for you to view the following digital edition.
Please click on the page below to be directed to the digital edition:
$thumbnail$pagenum
$link$pagenum
Your form submission was a success.
Downloading PDF
Generating your PDF, please wait...
This process might take longer please wait
