HYDRAULIC HOSE, FITTINGS, O-RINGS 8-42 GATES® HYDRAULIC HOSE Use with MegaCrimp® Fittings M2T MegaFlex Hose SAE 100R16 • Two braids of high-tensile steel wire reinforcement • Black synthetic rubber cover has a dual green stripe layline and is resistant to oil, abrasion and weather • Temperature range: –40°F to +212°F (–40°C to +100°C) • Meets SAE 100R16 Specification • Smaller O.D., low profile and light weight 50-ft. lengths consist of no more than two pieces with none shorter than 10 feet. Total length may vary from 45 to 55 feet. I.D. (Inches) Hose O.D. (Inches) Working Pressure (PSI) Burst Pressure (PSI) Bend Radius (Inches) Gates Item No. Item No. Pkg. Qty. 1/4 (-4) 0.56 6,000 24,000 1.5 4M2T NS168917 50 Ft. 3/8 (-6) 0.69 5,000 20,000 2.0 6M2T NS168918 50 Ft. 1/2 (-8) 0.82 4,300 17,200 2.8 8M2T NS168919 50 Ft. 5/8 (-10) 0.95 3,800 15,200 3.0 10M2T NS168920 50 Ft. 3/4 (-12) 1.11 3,500 14,000 3.8 12M2T NS168921 50 Ft. 1 (-16) 1.38 2,500 10,000 6 16M2T NS168922 50 Ft. Recommended for use with high-pressure hydraulic oil lines. Features half the standard bend radius of SAE 100R2 hose and superior flex impulse performance. Tight bend radius means less hose and less cost per job. Crimp settings are available on-line at www.gates.com/ecrimp. Simply indicate the hose and fittings to be crimped, and E-Crimp generates a custom crimp chart. Fittings: MegaCrimp® M3K Mega3000 Hose SAE 100R17 Recommended for use with high-pressure hydraulic oil lines. Features half the standard bend radius of SAE 100R1 and SAE 100R2 hoses and superior flex impulse performance. Flexibility allows for more compact hydraulic systems. • Braided high-tensile steel wire reinforcement: -4, -6 and -8 are one-braid; -10, -12 and -16 are two-braid • Black synthetic rubber cover is resistant to oil, abrasion and weather • For applications of 3,000 PSI or less, Mega3000 is the only hose needed • Temperature range: –40°F to +212°F (–40°C to +100°C) • Meets SAE Specification 100R17 50-ft. lengths consist of no more than two pieces with none shorter than 10 feet. Total length may vary from 45 to 55 feet. I.D. (Inches) Hose O.D. (Inches) Working Pressure (PSI) Burst Pressure (PSI) Bend Radius (Inches) Gates Item No. Item No. Pkg. Qty. 1/4 (-4) 0.48 3,250 13,000 1.5 4M3K NS168911 50 Ft. 3/8 (-6) 0.63 3,250 13,000 2.0 6M3K NS168912 50 Ft. 1/2 (-8) 0.80 3,250 13,000 2.8 8M3K NS168913 50 Ft. 5/8 (-10) 0.99 3,250 13,000 3.0 10M3K NS168914 50 Ft. 3/4 (-12) 1.15 3,250 13,000 3.8 12M3K NS168915 50 Ft. 1 (-16) 1.48 3,250 13,000 4.5 16M3K NS168916 50 Ft. Crimp settings are available on-line at www.gates.com/ecrimp. Simply indicate the hose and fittings to be crimped, and E-Crimp generates a custom crimp chart. Fittings: MegaCrimp®
